FUSION PLUS™ PREMIUM Ceramic Coating Limited Product Warranty

FUSION PLUS PREMIUM XPEL, Inc. (“the Company”) provides a firm guarantee to the product owner that the vehicle’s paint and XPEL paint protection films will be covered under the FUSION PLUS PREMIUM for a duration of eight (8) years from the installation date (referred to as the “Warranty Period”). This warranty safeguards against oxidation, loss of gloss, UV damage, and color fading. Coverage is applicable exclusively to products that are professionally installed as per the Company’s recommended procedures.

Should the product fail due to a manufacturing defect during the Warranty Period, the Company will, at its discretion, either remove or replace the product at no cost, or refund the purchase price. The resolution to replace will involve an authorized installer appointed by the Company, who will undertake the removal and reapplication of the product to areas deemed eligible under this warranty. The Company will be responsible for parts while the authorized installer will provide the labor for installation. Either a refund or a replacement of the product constitutes the sole remedies available under this Limited Warranty. Any repair or replacement will not extend the original Warranty Period nor initiate a new warranty period. The maximum liability of the Company under this warranty will not exceed the lesser of the cost of the coating application or $1,000.

To claim under this warranty, the owner must present the warranty card, a copy of the original receipt identifying the coverage areas, and a detailed description of the defect. Claims must be submitted in writing to the authorized installer who initially installed the product, including the claimant’s name, contact information, and a description of the issue.

This Limited Warranty can be transferred if the new owner submits proof of the product’s original installation date, thereby continuing the warranty for the remainder of the original period.

Disclaimer of Warranties

The effectiveness of this warranty requires that the Company’s products be stored, handled, installed, used, and maintained according to the Company’s instructions. Failure to follow these guidelines voids this warranty. The warranty does not cover damage from misuse, improper storage, or accidents, nor does it cover products installed despite visible defects.

Limitation of Liability

The Company’s liability for claims related to the products shall not exceed the purchase price of the products in question. The Company will not be responsible for indirect, special, incidental, or consequential damages, regardless of whether such damages were foreseeable.

Annual Inspections

Maintaining this warranty requires annual inspections by an XPEL certified Fusion Installer. These inspections must occur within 30 days of each anniversary of the product’s installation. If the inspection is not completed within this timeframe, the warranty will be void. Charges for the inspection are the owner’s responsibility.

FUSION PLUS™ PAINT & PPF Ceramic Coating

Limited Product Warranty

FUSION PLUS PAINT & PPF

XPEL, Inc. (the “Company”) explicitly guarantees the owner that during a four-year period from the date of initial installation (the “Warranty Period”), the vehicle’s paint finish and XPEL paint protection films on the FUSION PLUS PAINT & PPF (“Product(s)”) will be covered against oxidation, loss of gloss, UV damage, and color fading. This Limited Warranty is applicable only to products that have been professionally installed according to the Company’s guidelines.

Should a product fail due to a manufacturing defect within the Warranty Period, the Company reserves the right to either remove or replace the product at no cost or refund the purchase price. If a replacement is deemed necessary, the Company will authorize an installer to handle the removal and reapplication of the product on areas considered under this warranty. The Company is responsible for parts, while the labor for installation will be provided by the authorized installer. Refunding the purchase price or replacing the defective product constitutes the sole remedy provided under this Limited Warranty. Throughout the Warranty Period, the Company’s responsibility is limited to repairing or replacing with products available at the time of service. The maximum reimbursement from the Company will not exceed the lesser of the product’s application cost or $1,000. Repaired or replaced products will remain under the original Warranty Period, and such actions will not extend or renew the warranty.

To activate this Limited Warranty, provide the Company with the warranty card, a copy of the purchase receipt outlining the coverage areas, and a detailed description of the alleged defect. If service is needed under this warranty, you must inform the authorized installer who installed the product in writing, including your name, phone number, address, and installation address (if different), along with details of the product and the nature of the defect.

This Limited Warranty may be transferred if the new owner provides proof of the original installation date to the Company. Such a transfer extends the remaining time of the original Warranty Period to the new owner.

Disclaimer of Warranties
The Company mandates that its products be stored, handled, installed, used, and maintained following its provided instructions, as this Limited Warranty depends on such compliance. You can obtain copies of the Company’s instructional guides from the listed address or by contacting the Company at +1-210-678-3700 or visiting www.xpel.com/fusion-plus.

This warranty does not cover defects due to:

1. Non-adherence to the Company’s instructions, including damage from physical, chemical, thermal abuse, or misuse;
2. Incorrect storage, installation, handling, or use of the Product;
3. Damages not arising from manufacturing defects while the product is in the customer’s possession;
4. Unreasonable or unintended use of the product;
5. Installation of products despite visible defects like scratches or chips at the time of installation;
6. Minor issues such as stains and scratches;
7. Damage from improper washing techniques, automatic car washes, or abrasive washing tools, or by unauthorized third parties;
8. Physical damages like scratches and chips;
9. Stains from water spots caused by mineral deposits, which are not covered;
10. Damage from accidents, vandalism, natural disasters, manufacturer’s defects, or other external causes not related to manufacturing defects;
11. Areas not recoated after paint or body repairs;
12. Use in non-automotive applications. Any information or advice regarding the products is for convenience only and is made without guarantee of accuracy or appropriateness. It is your responsibility to verify and test any provided information for your specific use of the products.

THE WARRANTIES STATED HERE ARE THE ONLY WARRANTIES PROVIDED BY THE COMPANY FOR THESE PRODUCTS. THE COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE SOLD ACCORDING TO THE SPECIFICATIONS SET BY THE COMPANY ONLY. EXCEPT FOR THE RIGHTS UNDER THIS LIMITED WARRANTY, THE COMPANY OFFERS NO OTHER WARRANTIES. THE COMPANY’S SOLE DUTY UNDER THIS WARRANTY IS TO EITHER REPAIR OR REPLACE NON-CONFORMING PRODUCTS, OR TO RETURN THE PRODUCT AND REFUND THE PURCHASE PRICE. ALL RISKS ASSOCIATED WITH THE PRODUCTS’ USE, WHETHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS, ARE ASSUMED BY THE BUYER.

Limitation of Liability

Any claims by the buyer/owner, including demands for indemnification, cannot exceed the original purchase price of the products in question. The Company shall not be liable for any indirect, special, incidental, consequential, or other significant damages, even if such damages were foreseeable or the possibility of such damages was communicated to the Company, arising from the use or inability to use the products, or from any third-party claims regarding the products.

Annual Inspections

To maintain this warranty, it is mandatory to have your product inspected annually throughout the Warranty Period, as specified in the product documentation. An XPEL certified Fusion Installer must conduct these inspections within 30 days before or after each anniversary of the product’s installation or the date of the last inspection. Failure to complete these inspections within the designated timeframe will result in the voiding of the Limited Warranty. Any fees associated with the inspection are the responsibility of the product owner. Please retain all documentation of inspections, as they are required for any warranty-related services.

FUSION PLUS™ SATIN Ceramic Coating

Limited Product Warranty

FUSION PLUS SATIN

XPEL, Inc. (the “Company”) guarantees to the product owner that, for a term of four (4) years from the date of initial installation (the “Warranty Period”), the Company will protect the vehicle’s paint finish and XPEL paint protection films on the FUSION PLUS SATIN (“Product(s)”) from oxidation, loss of gloss, UV damage, and color fading. This Limited Warranty is valid only for products that are professionally installed following the Company’s recommended procedures.

The Company reserves the right to either remove or replace the Product without charge, or refund the cost of the Product, should the Product fail or not perform as warranted due to a manufacturing defect within the Warranty Period, as outlined in this Limited Warranty. If replacement is deemed necessary, an authorized installer selected by the Company will remove and reapply the Product to areas identified by the Company as covered under this Limited Warranty. The Company will provide the parts while the authorized installer will handle the installation labor. Refunds or replacements of the defective coating are the only remedies available under this Limited Warranty. Throughout the Warranty Period, the Company’s obligation to repair or replace is limited to using products that are available at the time of repair or replacement. The maximum liability of the Company will not exceed the lesser of the cost of the coating application or $1,000. Repaired or replaced products will continue to be covered under the original Warranty Period without extension or renewal of said period.

Coverage under this Limited Warranty requires submission of the warranty card, a copy of the original purchase receipt indicating the covered areas, and a detailed description of the alleged defect. To request service under this Limited Warranty, contact the authorized Company installer who initially installed the Product. You must provide this in writing, including the claimant’s name, phone number, address, and installation address (if different), and describe the product and defect involved.

This Limited Warranty is only transferable when the new owner provides the Company with proof of the original installation date. Transferring this Limited Warranty entitles the new owner to the remaining portion of the original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained according to the Company’s instructions, and this Limited Warranty is contingent upon such adherence. Instruction guides from the Company are available upon request at the address listed below or by contacting the Company at +1-210-678-3700 or through the Company’s website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects resulting from:

1. Non-adherence to the Company’s instructions, including damage from physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or usage of the Product;
3. Damages not arising from manufacturing defects while in the customer’s possession;
4. Unreasonable or unintended usage of the Product;
5. Installation despite known visible defects like scratches or chips;
6. Minor issues such as stains and scratches;
7. Damage from improper cleaning methods, automatic car washes, or incorrect cleaning tools, or damages caused by unauthorized third parties;
8. Scratches, scuffs, chips, or other similar damages to the painted surface;
9. Stains from water spots caused by mineral deposits that are not covered;
10. Damages from accidents, vandalism, natural disasters, external physical damages, or defects from vehicle manufacturers, potentially covered under a manufacturer’s protection plan;
11. Surfaces not recoated following paint or body repairs;
12. Use in non-automotive applications. Any advice or information provided by the Company regarding the products is for convenience only and is made without any guarantee of accuracy or suitability. Verification and testing of such information for specific applications of the products are the user’s responsibility.

THE WARRANTIES STATED HEREIN ARE THE ONLY WARRANTIES PROVIDED BY THE COMPANY FOR THESE PRODUCTS. NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE BY THE COMPANY. PRODUCTS ARE SOLD ACCORDING TO THE COMPANY’S SPECIFIC WRITTEN SPECIFICATIONS ONLY. BESIDES THIS LIMITED WARRANTY, NO OTHER EXPRESS OR IMPLIED WARRANTIES ARE PROVIDED. THE COMPANY’S SOLE DUTY UNDER THIS WARRANTY IS TO REPAIR OR REPLACE NON-CONFORMING PRODUCTS, OR AT THE COMPANY’S DISCRETION, TO RETURN THE PRODUCT AND REFUND THE PURCHASE PRICE. THE BUYER ASSUMES ALL RISKS RELATED TO THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS.

Limitation of Liability

No claims made by the buyer/owner, including claims for indemnification, shall exceed the purchase price of the products concerning which damages are claimed. The Company shall not be liable for any special, indirect, incidental, consequential, or exemplary damages, including but not limited to lost profits, loss of use, or loss of data, whether in tort, contract, or otherwise, even if advised of the possibility of such damages or if such damages could have been reasonably foreseen, arising from the sale, use, or inability to use the products or from any third-party claims regarding the products.

Annual Inspections

Maintaining this warranty requires an annual inspection within the warranty period, as specified in the product documentation. An XPEL certified Fusion Installer must perform this inspection each year within 30 days before or after the installation anniversary date or the date of any prior inspection. Failure to complete this inspection within the required timeframe will void the Limited Warranty. The owner is responsible for any fees or charges incurred for the annual inspection, which may include but are not limited to, exterior washing, decontamination, and inspection. Documentation of all inspections must be retained as they are necessary for any warranty-related services.

FUSION PLUS™ LITE Ceramic Coating

Limited Product Warranty

FUSION PLUS LITE

XPEL, Inc. (the “Company”) clearly warrants to the owner that for a duration of one (1) year from the initial installation date (the “Warranty Period”), it will protect the vehicle’s paint finish and XPEL paint protection films applied with FUSION PLUS LITE (“Product(s)”) against oxidation, loss of gloss, UV damage, and color fading. This Limited Warranty is applicable only to products professionally installed as recommended by the Company.

At its discretion, the Company may remove, replace, or refund the Product without charge if it fails or underperforms due solely to manufacturing defects within the Warranty Period, as specified in this Limited Warranty. Should the Company opt for replacement, it will authorize an installer to remove and reapply the Product to the areas deemed eligible under this warranty. The Company will provide the parts, and the authorized installer will undertake the installation labor. Refunds or replacements are the exclusive remedies available under this warranty. Throughout the Warranty Period, the Company’s commitment to repair or replace is limited to the products available at the time of repair or replacement. The maximum cost the Company will cover for replacement will not exceed the lesser of the application cost or $1,000. Repaired or replaced products will still be governed by the original Warranty Period, and no repair or replacement will extend or restart the warranty timeline.

Coverage under this warranty can be claimed by providing the Company with the warranty card, a copy of the original receipt specifying the covered areas, and a detailed description of the alleged defect. If service is needed under this warranty, you must inform the authorized installer who installed the Product, in writing, including the claimant’s name, contact details, and a description of the product and the defect.

This Limited Warranty is transferable only if the new owner submits proof of the original installation date to the Company. Transferring this warranty allows the new owner to benefit from the remaining original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained according to the Company’s guidelines, and adherence to these instructions is a prerequisite for this Limited Warranty. You can access the Company’s instructional materials at the address provided below or by contacting the Company at +1-210-678-3700 or via their website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects resulting from:

1. Failure to follow the Company’s instructions, including damage from physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or usage of the Product;
3. Damage not stemming from manufacturing defects while in the customer’s possession;
4. Unreasonable or unintended use of the Product;
5. Installation of products despite visible defects like scratches or chips;
6. Minor issues such as stains and scratches;
7. Damage from improper washing methods, automatic car washes, or unsuitable cleaning tools, or damage caused by unauthorized third parties;
8. Physical damages like scratches, scuffs, or chips;
9. Stains from water spots caused by mineral deposits, which are not covered;
10. Damage from collisions, accidents, vandalism, natural disasters, or defects from vehicle manufacturers that could be covered under a manufacturer’s warranty;
11. Areas not recoated following paint or body repairs;
12. Use in non-automotive applications. Any advice or information regarding the products is for your convenience and is provided without any guarantee of accuracy or appropriateness. You are responsible for verifying and testing any provided information for your specific application of the products.

Limitation of Liability

No claims by the buyer/owner, including claims for indemnification, shall exceed the purchase price of the products in question. The Company will not be liable for any special, indirect, or consequential damages, including lost profits or data loss, whether in tort, contract, or otherwise, even if aware of the potential for such damages, arising from the sale, delivery, use, or inability to use the products, or from any third-party claims related to the products.

THE WARRANTIES PROVIDED HERE ARE THE SOLE WARRANTIES OFFERED BY THE COMPANY FOR THESE PRODUCTS. THE COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS ARE ONLY SOLD ACCORDING TO THE COMPANY’S SPECIFIED TERMS. EXCEPT FOR THIS LIMITED WARRANTY, NO OTHER WARRANTIES ARE PROVIDED. THE COMPANY’S ONLY OBLIGATION UNDER THIS WARRANTY IS TO REPAIR OR REPLACE NON-CONFORMING PRODUCTS, OR AT THE COMPANY’S CHOICE, TO RETURN THE PRODUCT AND REFUND THE PURCHASE PRICE. THE BUYER ASSUMES ALL RISKS RELATED TO THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS.

FUSION PLUS™ WHEEL & CALIPER Ceramic Coating

Limited Product Warranty

FUSION PLUS WHEEL & CALIPER

XPEL, Inc. (the “Company”) firmly warrants to the owner that, for a duration of three (3) years from the initial installation date (the “Warranty Period”), the Company will protect the vehicle’s wheels, calipers, and XPEL paint protection films finish on the FUSION PLUS WHEEL & CALIPER (“Product(s)”) against loss of gloss and environmental contaminant staining. This Limited Warranty applies solely to products that are professionally installed as recommended by the Company.

The Company will, at its discretion, either remove or replace the Product at no charge, or refund the Product’s cost if the Product fails or does not perform as warranted due to a manufacturing defect within the Warranty Period, subject to the exclusions outlined in this Limited Warranty. Should the Company opt to replace the Product, it will assign an authorized installer to remove and reapply the Product to areas deemed covered under this Limited Warranty. The Company will provide the parts, and the authorized installer will handle the installation labor. Refunding the purchase price or replacing the defective coating represents the sole remedies available for all products under this Limited Warranty. Throughout the Warranty Period, the obligation of the Company to repair or replace shall be limited to using products available at the time of repair or replacement, specifically to the product that fails due to a manufacturing defect. The maximum compensation by the Company will not exceed the lesser of the coating application cost or $500. Repaired or replaced products will continue to be covered under the original Warranty Period without extension or renewal of the warranty term.

Coverage under this Limited Warranty can be achieved by providing the Company with the warranty card, a copy of the original purchase receipt highlighting the covered areas, and a detailed description of the alleged defect. For service under this Limited Warranty, you must contact the authorized Company installer who installed the Product, in writing, including the claimant’s name, phone number, address, and installation address (if different), as well as details about the product and the nature of the defect.

This Limited Warranty is transferable only when the new owner provides the Company with proof of the original installation date. Transferring this warranty entitles the new owner to the remaining portion of the original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained according to the Company’s instructions, and this Limited Warranty is contingent upon such compliance. Instructional guides from the Company are available at the address provided below. These materials can also be obtained by contacting the Company at +1-210-678-3700 or through the Company’s website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects resulting from:

1. Non-adherence to the Company’s instructions, including damage from physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or use of the Product;
3. Damages not arising from manufacturing defects while in the customer’s possession;
4. Unreasonable or unintended use of the Product;
5. Installation of products with visible defects at the time of installation, such as failing clear coat, swirl marks, scratches, scuffs, or chips on the wheel and caliper surfaces;
6. Minor issues like stains and scratches;
7. Damage from improper cleaning methods, automatic car washes, or incorrect cleaning tools, or damage caused by unauthorized third parties;
8. Swirl marks, scratches, scuffs, scrapes, chips on the wheel and caliper surfaces;
9. Water spots caused by mineral deposits that are not covered;
10. Damage from collisions, accidents, vandalism, natural disasters, brake dust, or defects from wheel or caliper manufacturers, potentially covered under a manufacturer’s protection plan;
11. Areas not recoated after paint or body repairs;
12. Use in non-automotive applications. All information or suggestions from the Company regarding the products for specific applications are provided for convenience and without guarantee of accuracy. It is the user’s responsibility to verify and test the suitability of such information.

THE WARRANTIES PROVIDED HERE ARE THE ONLY WARRANTIES MADE BY THE COMPANY REGARDING THESE PRODUCTS. THE COMPANY DOES NOT OFFER ANY IMPLIED OR EXPRESS WARRANTIES BEYOND THIS POINT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS ARE SOLD STRICTLY ACCORDING TO THE COMPANY’S SPECIFIED WRITINGS. OTHER THAN THIS LIMITED WARRANTY, NO FURTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE PROVIDED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS THE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR, AT THE COMPANY’S OPTION, THE RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. ALL RISKS ASSOCIATED WITH THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS

FUSION PLUS™ GLASS Coating

Limited Product Warranty

FUSION PLUS GLASS

XPEL, Inc. (the “Company”) explicitly warrants to the owner that, for a period of two (2) years from the date of initial installation (the “Warranty Period”), the Company will protect the vehicle’s glass under the FUSION PLUS GLASS (the “Product(s)”) against loss of hydrophobicity and environmental contaminant staining. This Limited Warranty is applicable only to products that are professionally installed according to the Company’s recommended practices.

The Company reserves the right, at its discretion, to remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, under the conditions stated in this Limited Warranty. Should the Company opt for replacement, it will appoint an authorized installer to remove and reapply the Product to areas deemed by the Company, in its sole discretion, to be covered under this Limited Warranty. The Company will provide the parts, and the authorized installer will undertake the installation labor. Refunds or replacements of the defective product are the exclusive remedies available under this Limited Warranty. Throughout the Warranty Period, the Company’s obligation to repair or replace is limited to using products available at the time of repair or replacement and is restricted to the specific Product that fails due to a manufacturing defect. The maximum compensation by the Company will not exceed the lesser of the cost of the coating application or $500. Repaired or replaced products remain under the original Warranty Period, and no extension or new warranty period commences.

Coverage under this Limited Warranty can be initiated by submitting to the Company a warranty card, a copy of the original purchase receipt specifying the covered areas, and a detailed description of the alleged defect. For service under this Limited Warranty, the authorized Company installer who installed the Product must be notified in writing, including the claimant’s name, phone number, address, and, if different, the installation address, along with a description of the product involved and the nature of the defect.

This Limited Warranty is transferable only upon submission of proof of the original installation date by the new owner to the Company. Transferring this warranty allows the new owner to benefit from the remaining original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained in strict accordance with the instructions provided by the Company, as the validity of this Limited Warranty depends on such compliance. Instructional guides from the Company are obtainable at the address listed below. These materials can also be accessed by contacting the Company at +1-210-678-3700 or on the Company’s website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects due to:

1. Non-compliance with the Company’s instructions, including damage from physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or use of the Product;
3. Damages not arising from manufacturing defects while the product is in the customer’s possession;
4. Unreasonable or unintended use of the Product;
5. Installation of the Product with known or visible defects at the time, including but not limited to scratches, scuffs, scrapes, or chips on the glass surface;
6. Minor conditions such as stains and scratches;
7. Damage from improper cleaning methods, automatic car washes, or incorrect cleaning tools, or damage caused by unauthorized third parties;
8. Scratches, scuffs, scrapes, chips on the glass surface;
9. Stains from water spots caused by mineral deposits that are not covered;
10. Damage from collisions, accidents, vandalism, natural disasters, or defects from glass manufacturers, potentially covered under a manufacturer’s protection plan;
11. Areas not recoated after glass repair or replacement;
12. Use in non-automotive applications. All advice and information about the products provided by the Company are intended for convenience and without any guarantee of accuracy. It is incumbent upon the user to verify and test any such information for their specific application.

THE WARRANTIES STATED HERE ARE THE ONLY WARRANTIES OFFERED BY THE COMPANY IN RELATION TO THESE PRODUCTS. THE COMPANY DOES NOT PROVIDE ANY IMPLIED OR EXPRESS WARRANTIES BEYOND THESE TERMS AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS ARE SOLD ACCORDING TO THE COMPANY’S SPECIFIED TERMS ONLY. BESIDES THIS LIMITED WARRANTY, THE COMPANY DOES NOT PROVIDE ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE RESPONSIBILITY UNDER THIS WARRANTY IS THE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR, AT THE COMPANY’S CHOICE, THE RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. THE PURCHASER ASSUMES ALL RISK RELATING TO THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS

FUSION PLUS™ PLASTIC & TRIM Ceramic Coating

Limited Product Warranty

FUSION PLUS PLASTIC & TRIM

XPEL, Inc. (the “Company”) explicitly guarantees to the owner that, for a period of one (1) year from the date of initial installation (the “Warranty Period”), the Company will protect the vehicle’s plastic and trim under the FUSION PLUS PLASTIC & TRIM (the “Product(s)”) against environmental contaminant staining and fading. This Limited Warranty is only valid for products that are professionally installed according to the Company’s recommended procedures.

The Company will, at its discretion, either remove or replace the Product at no charge, or refund the cost of the Product, if the Product fails or does not perform as warranted due to a manufacturing defect within the Warranty Period, subject to the exclusions mentioned in this Limited Warranty. If the Company opts to replace the Product, it will appoint an authorized installer to remove and reapply the Product to areas deemed by the Company to be covered under this Limited Warranty. The Company will provide the parts, and the authorized installer will be responsible for the installation labor. Refunds or replacements of the defective product are the sole remedies available under this Limited Warranty. Throughout the Warranty Period, the Company’s commitment to repair or replace will be limited to products available at the time of repair or replacement, specifically to the product that fails due to a manufacturing defect. The maximum compensation from the Company will not exceed the lesser of the cost of the coating application or $250. Repaired or replaced products will remain under the original Warranty Period, and no extension or renewal of the warranty period is granted.

To activate coverage under this Limited Warranty, submit the warranty card, a copy of the original purchase receipt indicating the covered areas, and a detailed description of the alleged defect to the Company. For service under this Limited Warranty, the authorized Company installer who installed the Product must be notified in writing, including the claimant’s name, phone number, address, and if different, the installation address, along with a description of the product involved and the nature of the defect.

This Limited Warranty is transferable only upon submission of proof of the original installation date to the Company by the new owner. The transfer of this warranty grants the new owner the remaining coverage of the original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained strictly according to the Company’s instructions, as the validity of this Limited Warranty depends on such compliance. Copies of the Company’s instructional guides are available at the address listed below. These materials can also be accessed by contacting the Company at +1-210-678-3700 or on the Company’s website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects resulting from:

1. Non-adherence to the Company’s instructions, including damage from physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or use of the Product;
3. Damages not arising from manufacturing defects while the product is in the customer’s possession;
4. Unreasonable or unintended use of the Product;
5. Negligence or failure to maintain the plastic trim in the correct manner;
6. Minor conditions such as stains and scratches;
7. Damage from improper cleaning methods, automatic car washes, or incorrect cleaning tools, or damage caused by unauthorized third parties;
8. Scratches, scuffs, scrapes, chips on the surface;
9. Stains from water spots caused by mineral deposits that are not covered;
10. Damage from collisions, accidents, vandalism, natural disasters, or defects from plastic and/or trim manufacturers, potentially covered under a manufacturer’s protection plan;
11. Areas not recoated after paint or body repairs;
12. Use in non-automotive applications. All advice and information about the products provided by the Company are intended for convenience without any guarantee of accuracy. It is incumbent upon the user to verify and test any such information for their specific application.

THE WARRANTIES PROVIDED HERE ARE THE ONLY WARRANTIES ISSUED BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY DOES NOT OFFER ANY IMPLIED OR EXPRESS WARRANTIES BEYOND THESE TERMS AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS ARE SOLD STRICTLY ACCORDING TO THE COMPANY’S SPECIFIED TERMS ONLY. BESIDES THIS LIMITED WARRANTY, NO OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE PROVIDED. THE COMPANY’S SOLE RESPONSIBILITY UNDER THIS WARRANTY IS THE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR, AT THE COMPANY’S OPTION, THE RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. THE PURCHASER ASSUMES ALL RISK RELATED TO THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS.

Limitation of Liability

No claims by the buyer/owner, including claims for indemnification, shall exceed the purchase price of the products in respect of which damages are claimed. In no event shall the Company be liable to the buyer/owner in tort, contract, or otherwise, for any special, indirect, incidental, consequential, reliance, statutory, punitive, or exemplary damages, including, but not limited to, lost profits, loss of use, loss of time, loss of revenues, inconvenience, loss of business opportunities, damage to goodwill or reputation, or loss of data, even if advised of the possibility of such damages or if such damages could have been reasonably foreseen, arising from the sale, delivery, servicing, use, or loss of use of the products sold hereunder, or for any liability of the buyer to any third party with respect to the products.

Annual Inspections

To maintain the warranty on your product, an annual inspection is required throughout the warranty period, as specified in the product documentation. This inspection must be performed by an XPEL certified Fusion Installer every year and completed within 30 days before or after the anniversary date of installation or the date of any previous inspection or service. Failure to complete the inspection within the required time will void the Limited Warranty. Any fees or charges for the annual inspection will be the responsibility of the owner, including but not limited to, exterior wash, decontamination, and inspection. Documentation of all inspections must be retained as they are necessary for any warranty-related services.

FUSION PLUS™ UPHOLSTERY Ceramic Coating Limited Product Warranty FUSION PLUS UPHOLSTERY XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of two (2) years from the date of initial installation (the “Warranty Period”), the Company will cover the vehicles interior surfaces on the FUSION PLUS UPHOLSTERY (the “Product(s)”) such as: carpet, fabric, leather and/or vinyl against fading and non-removable staining. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company. The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $250. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty. You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect. This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period. Disclaimer Of Warranties The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below. You may also obtain this/these materials by contacting Company at +1-210-678-3700 or on the Company’s website at www.xpel.com/fusion-plus. This Limited Warranty does not cover defects caused by: 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse; 2. improper storage, installation, handling and/or use of the Product; 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession; 4. unreasonable or unintended use of Product; 5. If the operator has deemed to have been negligent or failed to maintain the carpet, fabric, leather and/or vinyl in the correct manner; 6. Minor conditions such as stains, and scratches; 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company; 8. Damage to interior surfaces prior to application; 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the interior surface and/or ceramic coating may leave a stain, water spots are not covered; 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, physical damage, paint overspray, or carpet, fabric, leather and/or vinyl manufacturer’ defects, which may be covered under manufactures protection plan; and 11. Alcantara and suede fabrics. 12. Areas that have not been re-coated after a paint or body repair; 13. Use in non-automotive applications. Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application. THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES. Limitation Of Liability NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO. Annual Inspections To maintain the warranty on your product, an annual inspection is required throughout the warranty period, as stated in the product specifications. This inspection should be performed by an XPEL certified Fusion Installer every year and must be completed within 30 days before or after the anniversary date of installation or the date of any previous inspection or service. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, interior detail, vacuum, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS™ UPHOLSTERY Ceramic Coating

Limited Product Warranty

FUSION PLUS UPHOLSTERY

XPEL, Inc. (the “Company”) explicitly warrants to the owner that for a period of two (2) years from the date of initial installation (the “Warranty Period”), the Company will protect the vehicle’s interior surfaces covered by FUSION PLUS UPHOLSTERY (the “Product(s)”) such as carpet, fabric, leather, and vinyl against fading and non-removable staining. This Limited Warranty applies only to products that are professionally installed as recommended by the Company.

Should the Product fail or not perform as warranted due to a manufacturing defect within the Warranty Period, the Company, at its option, will either remove or replace the Product without charge, or refund the cost of the Product, in accordance with the exclusions listed in this Limited Warranty. If replacement is chosen, the Company will appoint an authorized installer to remove and reapply the Product to areas deemed by the Company to be covered under this Limited Warranty. The Company will supply the parts, and the authorized installer will provide the installation labor. Refunds or replacements of the defective product are the sole remedies available under this Limited Warranty. Throughout the Warranty Period, the obligation of the Company to repair or replace will be limited to products available at the time of repair or replacement and will only apply to the specific product that fails due to a manufacturing defect. The maximum compensation offered by the Company shall not exceed the lesser of the cost of the coating application or $250. Any repaired or replaced product will remain under the original Warranty Period, and no repair or replacement will extend or renew the Warranty Period.

Coverage under this Limited Warranty can be activated by providing the Company with the warranty card, a copy of the original purchase receipt that identifies the covered areas, and a detailed description of the alleged defect. For service under this Limited Warranty, the authorized Company installer who installed the Product must be notified in writing, and you must provide the claimant’s name, phone number, address, and if different, the installation address, as well as a description of the product involved and the nature of the defect.

This Limited Warranty is transferable only when the new owner presents the Company with proof of the original installation date. The transfer of this warranty entitles the new owner to the remainder of the original Warranty Period.

Disclaimer of Warranties

The Company’s products must be stored, handled, installed, used, and maintained in accordance with the instructions provided by the Company, and this Limited Warranty is contingent upon compliance with these instructions. Instructional guides from the Company are available at the address listed below. These materials can also be obtained by contacting the Company at +1-210-678-3700 or on the Company’s website at www.xpel.com/fusion-plus.

This Limited Warranty does not cover defects caused by:

1. Non-compliance with the Company’s instructions, including exposure to physical or chemical abuse, thermal shock, or misuse;
2. Improper storage, installation, handling, or use of the Product;
3. Damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
4. Unreasonable or unintended use of the Product;
5. Negligence or failure to maintain the carpet, fabric, leather, and/or vinyl properly;
6. Minor conditions such as stains and scratches;
7. Damage from improper washing techniques, automatic car washes, or incorrect wash tools, or by unauthorized third parties;
8. Pre-application damage to interior surfaces;
9. Water spots caused by mineral deposits not covered under warranty;
10. Damage from collisions, accidents, vandalism, natural disasters, or manufacturer defects possibly covered under a manufacturer’s warranty;
11. Exclusion of Alcantara and suede fabrics;
12. Areas not recoated following a paint or body repair;
13. Use in non-automotive applications. All information provided by the Company regarding the products is for convenience only and made without any guarantee of accuracy. You must verify and test the suitability of any information for your specific application.

THE WARRANTIES PROVIDED HERE ARE THE ONLY WARRANTIES ISSUED BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY DOES NOT OFFER ANY IMPLIED OR EXPRESS WARRANTIES BEYOND THESE TERMS AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS ARE SOLD STRICTLY ACCORDING TO THE COMPANY’S SPECIFIED TERMS ONLY. OTHER THAN THIS LIMITED WARRANTY, NO FURTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE PROVIDED. THE COMPANY’S SOLE RESPONSIBILITY UNDER THIS WARRANTY IS THE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR, AT THE COMPANY’S OPTION, THE RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. THE PURCHASER ASSUMES ALL RISK RELATED TO THE USE OF THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER PRODUCTS.

Limitation of Liability

No claims by the buyer/owner, including claims for indemnification, shall exceed the purchase price of the products concerning which damages are claimed. In no event shall the Company be liable to the buyer/owner in tort, contract, or otherwise, for any special, indirect, incidental, consequential, reliance, statutory, punitive, or exemplary damages, including, but not limited to, lost profits, loss of use, loss of time, loss of revenues, inconvenience, loss of business opportunities, damage to goodwill or reputation, or loss of data, even if advised of the possibility of such damages or if such damages could have been reasonably foreseen, arising from the sale, delivery, servicing, use, or loss of use of the products sold hereunder, or for any liability of the buyer to any third party with respect to the products.

Annual Inspections

To maintain the warranty on your product, an annual inspection is required throughout the warranty period, as stated in the product specifications. This inspection must be performed by an XPEL certified Fusion Installer every year and completed within 30 days before or after the anniversary date of installation or the date of any previous inspection or service. Failure to complete the inspection within the required timeframe will void the Limited Warranty. Any fees or charges for the annual inspection will be the responsibility of the owner and include, but are not limited to, interior detailing, vacuuming, and inspection. Please retain all documentation of inspections, as they are necessary for any warranty-related services.